Plastic Bumper Repair: Prep, Adhesion & Primer
The job: scuffs, scrapes and damage on a plastic bumper cover. Plastic needs a different prep than metal. Skip a step and the paint peels, so here's the full sequence we recommend.
What you'll need
- BSB Wax & Grease Remover: clean before and after sanding
- Mirka Mirlon Total Scuff Pads or Indasa Nylon Web Scuff Pads: scuff the areas you won't sand
- Indasa Rhynogrip Red Line 5" Discs, P180 & P220: sand the damaged area
- Gecko Adhesion Promoter: helps primer grip bare plastic
- 2:1 Epoxy Primer HS: seal the repair
Step by step
- Wash the bumper, then wipe with wax & grease remover.
- Sand the damaged area with P180, then P220 to featheredge.
- Scuff the rest of the area to be painted.
- Clean again with wax & grease remover.
- Apply adhesion promoter to any bare plastic, following the product's flash time.
- Prime the repair.
Deep gouges in plastic need a filler made for plastic. Call us and we'll recommend the right one for your bumper.
Not sure what you need?
Tell us the job and we'll put the right setup together for you. Call 631-991-7188 or email info@unitedfinish.com. Orders placed before 2 PM ship the same day.
